- #RECLAIME RAID RECOVERY HOW TO#
- #RECLAIME RAID RECOVERY MOVIE#
- #RECLAIME RAID RECOVERY SOFTWARE#
- #RECLAIME RAID RECOVERY PC#
- #RECLAIME RAID RECOVERY WINDOWS#
We can check that we constructed the RAID5 correctly. Just double-click the object and see the folder/file structure on the virtual RAID 5. Let's enumerate the files on that partition. We may process this partition as a real object. As soon as R-Studio detects a valid file system, a new Partition 1 object will appear on the Drive pane. Specify the correct blocks order and offset (in sectors). Drag the objects from which we want to create the RAID5 to the Parents tab and place them in the correct order, that is, SCSI(3:0), SCSI(3:1), SCSI(3:2). The newly created virtual RAID5 object will appear on the Drive pane, and the Parents tab will appear on the R-Studio Main panel.Ĭheck that Apply changes immediately is selected.Ĭlick image to enlarge 2. Click the Create virtual volume sets or RAIDs button and select Create Virtual Block RAID. Block order: Left Asynchronous (Continuous)
#RECLAIME RAID RECOVERY HOW TO#
Let's start the process of learning how to work with RAIDs in R-Studio by creating a simple RAID 5:Ģ.
R-Studio supports many RAID levels and types. You can read more about working with RAID in R-Studio on-line help: Volume Sets and RAIDs. Please note that virtual volumes and RAIDs are purely virtual objects, and R-Studio does not write anything on the devices from which such objects are created. Virtual RAIDs can be constructed using any device objects visible to R-Studio, be they hard drives, logical disks, or images. Such a virtual object can be searched for files and scanned, and files found on it can be recovered in the same way that they would from normal drives/volumes. That is, you can construct the original RAID from its drives and/or drive images in R-Studio and process it as you would any other device object. Working with RAIDs in R-Studio is based on the concept of virtual volume sets and RAIDs. For example, for a mirror (RAID 1) of two drives, at least one must be valid, whereas for a RAID 5 of three disks, the number of valid drives should be two. The number of drives needed in order to get data back depends on the RAID layout. But what to do if you have only drives or drive images of a faulty RAID? R-Studio can still help you to get the data back, provided that the drives necessary for the RAID to operate are working or you have the images of those drives.
#RECLAIME RAID RECOVERY SOFTWARE#
Double click it to start recovery.R-Studio detects and treats valid software or hardware RAIDs as regular drives/volumes. On the left panel, "Virtual Block RAID 1" is the newly created RAID. Below the RAID diagram, click "Apply".ġ4. In the "Parents" table, enter "0 Sectors" as "Offset" in all rows.ġ3. Below that, set "Block order" to "Left Synchronous".ġ2. Below that, set "Block size" to "64 KB".ġ1. On the right side of the R-Studio window, set "RAID type" to "RAID5".ġ0. Right click the disk list on the right, select "Add E:\0_4.dsk" from the pop-up menu.ĩ. Right click the disk list on the right, select "Add E:\0_3.dsk" from the pop-up menu.Ĩ. Right click the disk list on the right, select "Add E:\0_2.dsk" from the pop-up menu.ħ. Then, select "Create Virtual Block RAID" from the dropdown menu.Ħ. On the toolbar, click "Create Virtual RAID". Enter "E:\0_4.dsk" as the file name, click "Open"ĥ. Enter "E:\0_3.dsk" as the file name, click "Open"Ĥ. Enter "E:\0_2.dsk" as the file name, click "Open"ģ. These are the instructions for the raid-5 I recovered.Ģ.
Each of the 3 x 1TB images I created took 2 hours.
#RECLAIME RAID RECOVERY PC#
On a PC with an i7-6700, 32GB of Ram, 512MB M2 PCIE, 1TB Samsung EVO SSD, a 4TB Sata storage drive and a USB 3.0 hard drive adapter.
#RECLAIME RAID RECOVERY MOVIE#
This will be an important parameter when recovering the raid.ĥ.Ĝlick ok, then go pick out a movie to watch. This helps keep track of where the drives were installed in the server. Select a location for saving the image and name the image according to the drive label you created earlier. Select the option to create a Byte to byte image (the extension for the file name should be. Open R-Studio and right click on the drive name in the left hand window.
#RECLAIME RAID RECOVERY WINDOWS#
Ignore any warnings Windows may make when connecting the drive.Ģ. You will need to do this for each of the 3 hard drives from the raid-5.ġ.Ĝonnect the first drive to the USB drive adapter and power it on. Creating an image of the drive and working with the image in r-studio will help prevent complete data loss. You never want to try and perform any type of recovery on a live drive. In my case I knew the issue with the server was with the system board and not because of a failed raid controller or hard drive.
0 kommentar(er)
